Hybrid Driver Kit

$54.95

One RF-HD2 Hybrid Driver Kit. The ReactorForge uses two drivers to drive each of it’s IGBT modules.

In stock

Add to Wishlist
Add to Wishlist
SKU: RF-HD2-KIT Category:

Description

This kit contains a bare RF-HD2 Hybrid Driver PCB and all required components to assemble your own dual hybrid gate driver. The ReactorForge uses two of these drivers to drive it’s IGBT modules.

The RF-HD2 is a dual channel gate drive circuit for high power IGBT modules. The RF-HD2 utilizes Powerex hybrid gate drivers and DC to DC converters to provide efficient switching of modules rated up to 400A. The hybrid gate drivers include high-speed optocouplers for control signal isolation and desaturation detection to protect the IGBT from short circuit conditions. Each hybrid DC to DC converter provides fully isolated control power for each driving channel. The RF-HD2 also provides an isolated fault feedback signal.

Features:

  • 5A peak output current rated at 20KHz
  • 2500VRMS isolation for control power and signals
  • Standard AMP MTA .100” input connector
  • Operates on one 5 VDC and one 12-18 VDC supply
  • Wide output voltage swing +15V/-8V
  • Compact Size 3” x 2” (76mm x 50mm)
  • Can be soldered directly to an IGBT module

The RF-HD2 Hybrid Driver is an open source project. The full schematics and bill of materials for the Hybrid Driver board are on GitHub:
Hybrid Driver BOM

For more info on the driver board, make sure to read the wiki:
Reactor Forge Hybrid Driver Wiki

Additional information

Weight 70 g
Dimensions 12 × 8 × 5 cm
Assembly required

This kit contains a bare RF-HD2 PCB and all required components. You will need to solder each component to the proper location on the PCB.

Reviews

There are no reviews yet.

Be the first to review “Hybrid Driver Kit”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…